> ## Documentation Index
> Fetch the complete documentation index at: https://docs.wavecx.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Media shows as "Used in" after you removed it

You removed an image from a Demo, but the Media Library still lists that Demo under the image's Used in section. The Used in list is accurate. The image is still saved on a step, but it isn't visible to viewers. This page explains why, how to find the image, and how to clear it.

***

## What you're seeing

You open an image in the Media Library and its Used in section lists a Demo.

![Screenshot 2026 11 10 At 10 40 14 AM](https://mintcdn.com/wave-cx-73936e8c/7RsnGJF7pwECcUOm/images/Screenshot-2026-11-10-at-10.40.14-AM.png?fit=max\&auto=format\&n=7RsnGJF7pwECcUOm\&q=85\&s=2657b13bc42751a512cec4c63c4faf4a)

You open that Demo and you do not see the image used anywhere in that demo.

It's easy to read this as stale data, but it isn't. The image is still saved on one of the Demo's steps in a hidden state. That counts as still in use, so the Media Library keeps listing it.

***

## Why it happens

WaveCX keeps media on a step even when the step no longer displays it. That way, you can easily bring the image back later without uploading it again. 

**There are two common cases:**

* **Header & Footer is off –** The step has a header or footer image, but Add Header & Footer is turned off. The image is saved but not displayed.
* **Use previous is on –** The step is set to use the previous step's image, header, or footer. The step displays the previous step's media, but its own original image is still saved underneath.

In both cases the image isn't visible to viewers, but it's still attached to the step. That's why it appears under Used in.

***

## How to find it

1. In the Media Library, open an image.
2. Under the Used in section, note which Demo (or other content type) it lists.
3. Open that Demo and check the Features and Steps. Look for steps where the header or footer is turned **off**, or where media is set to **use previous** step.

The image usually sits on a step that shows nothing, or that displays a different image. If you used Duplicate to copy the Demo, check both the copy and original demos. A copy carries the same hidden media.

***

## How to clear it

If you are not bothered by this, you don't have to do anything. Hidden media will not appear to viewers and doesn't affect Demo functionality. The only effect is that you can't permanently delete the image from the Media Library without a confirmation warning, because it is still technically in use.

> [!NOTE]
>
> If you want to keep a clean Media Library, clear the hidden image using the steps below.

### Steps

**If the step used a Header or Footer but it is now turned off**

1. Open the Demo and go to the step listed.
2. Turn Add Header & Footer on. The saved header or footer image appears.
3. Remove the image.
4. Turn Add Header & Footer back off if you want it off.
5. Save the Demo.

**If the step uses the previous media**

1. Open the Demo and go to the step listed.
2. Click the main media, header, or footer button, depending on where the image is listed.
3. Turn Use previous off. The step's original image appears.
4. Remove the image.
5. Save the Demo.


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.